Metallic Silver: 

HEAT PRESS TEMPERATURE: 270°F to 280°F
PRESSING TIME
1st Press: 8 to 10 seconds under medium pressure wait several seconds to the Vinyl cool down. Then peel of the transparent film and press second time.
2nd Press: 3 to 5 seconds after peeling of the film.
PEELING: Warm
PRESSURE: Medium
We highly recommend performing a test before proceeding with standard production.
Written by Christy Isbell

More stories

DTF (Direct to Film) Transfer Pressing Instructions

DTF (DIRECT TO FILM) TRANSFER INSTRUCTIONS:Set heat press to 275-300 depending on your press. Start with a lower temp and increase if needed. Pre-P...

Regular Puff HTV Pressing Instructions

HEAT PRESS TEMPERATURE: 260°F to 280°F  Note: Press the Vinyl on the matte side  ( MATTE SIDE IS FACING UP) PRESSING TIME Press: 8 to 10 seconds...