HEAT PRESS TEMPERATURE: 265°F to 270°F PRESSING TIME:1st Press: 8 to 10 seconds under medium pressure. Then peel off the transparent film.2nd Press: 3 to 5 seconds after peeling of the film.PEELING: HotPRESSURE: Medium We highly recommend performing a test...
HEAT PRESS TEMPERATURE: 260°F to 280°F Note: Press the Vinyl on the matte side ( MATTE SIDE IS FACING UP) PRESSING TIME Press: 8 to 10 seconds PEELING: Hot PRESSURE: Medium We highly recommend performing a test before...
Metallic Silver: HEAT PRESS TEMPERATURE: 270°F to 280°F PRESSING TIME 1st Press: 8 to 10 seconds under medium pressure wait several seconds to the Vinyl cool down. Then peel of the transparent film and press second...
DTF (DIRECT TO FILM) TRANSFER INSTRUCTIONS:Set heat press to 275-300 depending on your press. Start with a lower temp and increase if needed. Pre-Press the shirt/material for 5 seconds to remove moisture. Center transfer on...
I placed an order. When will it ship? Please be sure to check the published lead-time on the banner on the website as lead-times vary based on our current volume. Also please note that once...
We do offer custom prints in DTF, HTV and Dye Sublimation Transfers. To Submit an order, simply go to the link below to fill out our order form. The link will provide you with the available...
