Screen Print Transfer Instructions

Posted by Christy Isbell on

Rough/Low Heat Transfers: Set Heat Press to 325-350 depending on your press. Start with a lower temp and increase if needed. Pre-Press the shirt/material to remove moisture. Center transfer on shirt/material and press for 5-7 seconds. Hot peel gently; if transfer has issues sticking, press for 2-3 more seconds. 

Soft/High Heat Transfers: Set heat press to 350-375, set pressure to 60 PSI and press for 7 seconds. Hot peel gently; if transfer has issues sticking, press for 2-3 more seconds. 

SCREEN PRINTS REQUIRE HEAVY PRESSURE. IT SHOULD BE SO HEAVY THAT IT IS HARD FOR YOU TO OPEN THE PRESS. YOU MUST HAVE A HEAT PRESS! THESE WILL NOT WORK WITH A HOME IRON OR EASY PRESS. 

Do not use teflon or any kind of paper to cover the transfers. Screen prints do not require this.

0 comments

Leave a comment

Please note, comments must be approved before they are published